10211067
Used-J.C. Steele & Sons Noodle / Aggregate Cutter. Unit is designed to cut extruded wet clay with wire string rotating cutter. Complete with motor and shaft mount speed reducer drive. Shipping dimensions approximately 9' long X 5' tall X 4.5' wide. Unit comes complete with speed control and other start / stop pushbuttons and indicator lights. details
|
13506015
Used-Urschel RA-D Cutter Slicer. Three dimensional dicer features a wide variety of speeds and knife styles to give excellent results on a variety of products such as meat, cheese, pickles, vegetables, fruits and nuts. Types of cut slices, strip cuts or dices can be produced by using the required cutting spindles and adjusting the slice thickness. Slice details
|
|
|
|
|
|
|
40312040
Used- Urschel Dicer, Model M, 304 stainless steel. Designed for dicing or strip cuttiing food products. 11'' wide x 60'' long infeed conveyor, (1) feed roll, (17) 4 1/2'' diameter circular knives, feed drum. Driven by a 5 hp, 3/60, 460 volt at 1175 rpm, 416 volt at 1165 rpm, 400 volt at 1165 rpm motor with a Stearns brake. Includes a 12'' wide x 4' details
|
90446
USED: Grote cheese shredder, model 200-D-100, stainless steel. Approximate capacity 20# blocks of cheese. Shredder accepts a block of cheese and slices blocks directly into a shredding grate. Shredder is capable of production from 2500 to 4500# per hour depending on size of shred. Driven by a 10 hp, 3/60/208-230/460 volt, 1725 hydraulic power pack. details
|
89134
USED: Stephan vertical cutter-mixer, model UMC12-F/3, 304 stainless steel. (1) 12 liter jacketed mixing bowl approximately 12-1/2" diameter x 7" deep. Dished top cover with sightglass. Unit includes (1) cutting head, (1) Busch vacuum pump, (1) Hakke water bath. Mixer driven by an approximate 1.8 kw (2.5 hp), 3/60/208 volt, 150-3000 rpm motor. Mounted on details
|
522610
USED: Gerber cutter CDS 2500. Length of table 36 feet (11 meter), divisible; width of table 59" (1500mm), working width 47" (1200mm); all parts packed. European standard: 110V/20 amps, 200V- 240V/10 amps, single phase 50/60 hz (4 wire). Compressed air: 80-120 psi/0.5 scfm (5.5-8.3 bar/14 liters min). Material is held by vacuum. The cutting head is designed details
|
|
|
|
|
|
|
|
|
520671
USED: Urschel "Comitrol" mill model 1500. Features all stainlesssteel construction with micro cut style head, 2" pipe inlet withtri clamp connection and 1" outlet also with tri clamp connection,30 hp Louis Allis "Magnetek" drive, explosion proof, rated for Class *Group D and Glass II Groups F & G. Equipped with explosion proofDings magnetic brake, 230/460/3 details
|
520121
USED: Van Mark peeler/washer and scrubber, Series 2900, purchasednew in 2001. Combination peeler, washer and scrubber. Designed toprovide peeling and/or washing of fruits, nuts or vegetables. Rotarychamber with driven rollers for positive tumbling, internal augerassures retention control, integrated water sprays for continuousproduct rinsing. Unit was in details
|
|
|
|
|
518330
USED: Urschel dicer/slicer, model SL-A, USDA approved, stainless steelcontinuous operation, dices 4" blocks into cubes or strips, slicingknife, circular knife spindle, crosscut knife spindle, slices up to 1/2", dices from 1/4" to 3". 2 hp, 440 VAC, 3 ph variable speed motor. details
|
|
|