REQUEST PRICE QUOTE
Width (in.): 1
Length (in.): KINERGY
Manufacturer: KDFBC-12-SD
Material: 304SS
40449001
Used- Kinergy continuous fluid bed dryer, model KDFBC-12-SD. 304 stainless steel. 12'' wide x 171'' long perforated pan, bolt on top cover with (3) 6'' sight glass, 3/4 hp, 3/60/480 volt, 570 rpm motor. 11" diameter inlet, 10" x 12' outlet. New York blower exhaust fan, series 20GI, size 174, driven by a 7.5 hp, 3/60/230/460 volt, 1745 rpm motor with cyclone separator, details
|
|
|
|
|
REQUEST PRICE QUOTE
Width (in.): 10
Length (in.): 90
Manufacturer: Carrier
Material: Stainless Steel
87201
USED: Carrier vibratory continuous fluid bed dryer, model FTAD1240S14GA, stainless steel. Approximate 10" wide x 90" long bottom screen. Approximate 1 hp vibrating motor. Stroke 3/16". Top end inlet with hopper, end bottom outlet. Mounted on a carbon steel frame. Includes bottom screen, top cover. Built 1991. details
|
REQUEST PRICE QUOTE
Width (in.): 46.8
Length (in.): 277
Manufacturer: Vibra Maschinenfabri
Material: stainless steel
522675
USED: Vibra vibrating fluid bed dryer, type VF71/12. Material of construction is stainless steel. 46.8" wide x 277" straight side (1200mm x 7100mm). 87.9 square feet (8.52 square meter) in 3 sections, heating/cooling area. Inlet 4840 lbs (2200 kgs) at TS 93.3% at 140 deg F (60 deg C) per hour. Outlet 4657 lbs (2117 kgs) at TS 97.2% at 111.9 deg F (44.4 details
|
|
|
|
|
|
|
|
|
|
|
REQUEST PRICE QUOTE
Width (in.): 32
Length (in.): 184.8
Manufacturer: APV
Material: 304 Stainless Steel
79710
USED: APV continuous fluid bed dryer, model FBTS2, 304 stainless steel. 32" wide x 185" long perforated screen. Inner spray balls,insulated top cover. 30" top opening, approx 8" side top inlet,9-1/2" x 5" side outlet. (1) 17 x 11, (1) 37 x 11 side air inlets.Mounted on 4 legs. Approx 29" high discharge height. details
|
REQUEST PRICE QUOTE
Width (in.): 32
Length (in.): 184.8
Manufacturer: APV
Material: 304 Stainless Steel
79711
USED: APV continuous fluid bed dryer, model FBTS2, 304 stainless steel. 32" wide x 185" long perforated screen. Inner spray balls,insulated top cover. 30" top opening, approx 8" side top inlet,9-1/2" x 5" side outlet. (1) 17 x 11, (1) 37 x 11 side air inlets.Mounted on 4 legs. Approx 29" high discharge height. details
|
REQUEST PRICE QUOTE
Width (in.): 16
Length (in.): 260.4
Manufacturer: Frank Hamachek Machi
Material: Stainless Steel
78517
USED:Frank Hamachek Machine Co vibratory fluid bed dryer, stainlesssteel. 16" wide x 259" long 3 zone bed, (6) 8" top inlets, (1) 8"side bottom outlet, 40" discharge height, 3 hinged covers. Driven bya 3 hp, 1750 rpm, 3/60/230/460 volt motor. Mounted on stainless steel stand. details
|
|
|
|
|
REQUEST PRICE QUOTE
Width (in.): 6
Length (in.): 228
Manufacturer: Vibranetics
Material: 304 Stainless Steel
69299
USED: Vibranetics vibratory fluid bed cooler, model VCS. 304 stainlesssteel bottom jacketed and insulated trough, 6' wide x 19' long x5-1/2" deep. (2) 2-1/4" jacket connections. 5 piece clamp-on 10 gaugedomed top covers. 14" diameter end bottom outlet. Belt driven by anapprox 7-1/2 hp, 230/460 volt motor. Unit mounted on a 45" high steelframe. Includes details
|
63802
USED: Harpring fluid bed dryer, type 8-674. Non-vibrating bed. Size18" wide x 60" long with 31" high walls. Steam heated through a USACoil & Air model 12x18, 1"/ 3/4" in/out. Approx 5 to 7-1/2 hp blower.4 compartment heat zone (adjustable). 9-1/2" x 22-1/2" feed opening.Discharge screen with 1/3 hp 208-230/460 1725 rpm scraper motor.Includes snap down top details
|
REQUEST PRICE QUOTE
Width (in.): 32
Length (in.): 156
Manufacturer: Strong Scott
Material: Stainless Steel
63528
USED: Strong Scott continuous fluid bed dryer system. Stainless steel construction, consisting of: Scott fluid bed dryer 32" wide x 13' longapprox 32 sq ft of dryering area; (1) feeder bin 36"D x 36" st side x41" cone bottom with 18" x 18" air lock; (3) Buffalo blowers (1 size60, no motor), (1 size 50, 60 hp motor), (1 size 45, 25 hp motor);(1) conveyor details
|