|
|
40570001
Used- PTI 5'' Trident Series single screw extruder, model 5000. Approximate 28 to 1 L/D ratio. 5 zone electrically heated, air cooled non-vented barrel. Water cooled feed throat, no hopper. Approximate 52'' centerline height. Driven by a 300 hp, 3/60/460 volt, 1192/1785 rpm motor thru a gearbox, ratio 17.111 to 1, 300 hp rating, catalog rating 482 hp, details
|
40570002
Used-PTI 2.5'' Trident Series single screw extruder, model 2500. Approximate 32 to 1 L/D ratio. 5 zone electrically heated, air cooled non-vented barrel. Water cooled feed throat, no hopper. Approximate 88'' centerline height. Driven by a 50 hp, 3/60-90/460 volt, 1780/2670 rpm motor thru a gearbox, ratio 17.533 to 1, 75 hp rating, catalog rating 150 hp. details
|
40570003
Used-PTI 2.5'' Trident Series single screw extruder, model 2500. Approximate 32 to 1 L/D ratio. 5 zone electrically heated, air cooled non-vented barrel. Water cooled feed throat, no hopper. Approximate 82'' centerline height. Driven by a 50 hp, 3/60-90/460 volt, 1780/2670 rpm motor thru a gearbox, ratio 17.533 to 1, 75hp rating, catalog rating 150 hp. details
|
40408001
Used- PTI model 3500 3.5", 30:1 extruder having a 5 zone electrically heated, air cooled barrel at an approximate 42" centerline height. Gearbox is direct driven by a 125 hp AC motor in a tuck under manner. Unitized temperature control panel with solid stated controllers. Offered less inverter. Includes 220 KVA, 460 volt isolation transformer for drive details
|
40350001
Used-NRM 2.5" single screw extruder, model PM IV. 2.5" screw diameter, 24:1 L/D ratio, electrically heated, air cooled, non-vented barrel. Gearbox ratio 15.23:1, 1750 rpm, 1.25 SF, rated 56 hp. Unit driven by a 50 hp DC motor thru a Reliance DC drive and Fenner digital controller. 460 volt, 94 amp. Reported hours used 13,384. Reported manufactured 1990. details
|
40158032
Used- Betol 1.9'' (50mm) single screw extruder, model BC50, approximate 24 to 1 L/D ratio. Electrically heated, air cooled 4 zone non-vented barrel. Water cooled feed throat with a hopper. Driven by an 18 hp (13.4kw), 3/460/1560 rpm motor thru a reducer. Includes a control panel with Eurotherm digital controllers, and a Reliance Flex-Pak 3000 D-CV-S drive. details
|
|
|
40158016
Used- Akron 1 3/4'' single screw extruder, model M-PAK175, approximately 24 to 1 L/D ratio. Electrically heated, air cooled 3 zone non-vented barrel. Water cooled feed throat with a lump breaker, no hopper. Approximately 42'' centerline height. Driven by a 15 hp, 6400 volt, 1750 rpm DC motor with a gearbox, ratio 14 to 1. Includes a free standing control panel details
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
90541
USED: Davis Standard extruder, Model 75MM25, type DSPA 75MM screw diameter approx 44:1 L/D ratio.152 1/2" from back of feed throat to end of barrel.Electrically heated, 10 zone barrel air cooling.5" long x 3 1/4" wide feed opening.Approx. 42 1/2" centerline height.Driven by a 42.4 KW, 480 volt, 1985 RPM DC motor with gearbox ratio 17.26:1.Includes a 2 piece details
|
|
|
|
|
|
|
|
|
|
|
89309
USED: Becz Machine 1.25" pedestal mounted single screw extruder, model 252. Approximate 12:1 L/D ratio. Electrically heated, air cooled 2 zone non-vented barrel. Water cooled feed throat with hopper. Driven by a 3 hp, 180 volt, 1750/2050 rpm DC motor thru a reducer, ratio 50:1. Includes a control panel with controllers. Mounted on a common base with casters. details
|
89311
USED: Royal Machine 1.25" pedestal mounted single screw extruder, model 252.25. Approximate 12:1 L/D ratio, electrically heated, air cooled single zone non-vented barrel. Water cooled feed throat with hopper. Driven by a 3 hp, 180 volt, 1750/2050 rpm DC motor thru a reducer, ratio 50:1. Includes a control panel with controllers. Mounted on a common base details
|
89312
USED: Royal Machine 1.25" pedestal mounted single screw extruder, model 253. Approximate 24:1 L/D ratio, electrically heated, air cooled 3 zone non-vented barrel. Water cooled feed throat with hopper. Driven by a 5 hp, 320 volt, 1750 rpm DC motor thru a reducer. Includes a control panel with controllers and a brushless 1000 drive. Motorized vertical adjustment. details
|
89313
USED: Royal Machine 1.25" pedestal mounted single screw extruder, model 252.25, approximate 15:1 L/D ratio. Electrically heated, air cooled 3 zone non-vented barrel. Water cooled feed throat with hopper. Driven by a 3 hp, 180 volt, 1750/2050 rpm DC motor thru a reducer. Includes a control panel with controllers and a Reliance Flex Pak VS drive. Mounted on details
|
89318
USED: Davis Standard 1.25" pedestal mounted single screw extruder, model DS1.25, approximate 24:1 L/D ratio. Electrically heated, air cooled 3 zone non-vented barrel. Water cooled feed throat with hopper. Driven by a 5 hp, 180 volt, 1750/2050 rpm DC motor thru a reducer, ratio 15:1. Includes a control panel with controllers and an Industrial Control details
|
89322
USED: Becz Machine 1.25" pedestal mounted single screw extruder, model 252.25. Approximate 12:1 L/D ratio. Electrically heated, air cooled single zone non-vented barrel. Water cooled feed throat with hopper. Driven by a 3 hp, 180 volt, 1750/2050 rpm DC motor thru a reducer, ratio 50:1. Includes a control panel with controllers. Mounted on a common base details
|
89325
USED: Royal Machine 1.25" pedestal mounted single screw extruder, model 253. Approximate 24:1 L/D ratio, electrically heated, air cooled 3 zone non-vented barrel. Water cooled feed throat with hopper. Driven by a 5 hp, variable phase, 60/120, 230/460 volt, 1750/3490 rpm motor thru a reducer. Includes a control panel with controllers and a Mitsubishi A500 details
|
|
|
|
|
|
|
89085
USED: Royal 10" single screw dump extruder. 6:1 L/D ratio, cored screw, (2) zone jacketed barrel. 11" x 12" jacketed feed throat with chute. Approximate 42" centrline height, swing away 1-1/2" diameter die. Driven by a 150 hp, 3/60/575 volt, 1783 rpm motor thru a Royle 3A gearbox. Includes a transformer, variable AC drive panel. details
|
|
|
|
|
87997
USED: Deltaplast Machinery 4.5" single screw extruder, model D130:450:34. Approximately 34:1 L/D ratio. Electrically heated, water cooled 8 zone, side vented barrel. Closed loop system with (2) pumps, (2) tanks and (2) heat exchangers. Water cooled feed throat, no hopper. Driven by a 250 hp, 500 volt, 1750/2000 rpm DC motor thru a reducer. Gearbox ratio details
|
|
|
|
|
|
|
|
|
|
< |