REQUEST PRICE QUOTE
Diameter (in.): 2.2
HP: 110.25
Manufacturer: Werner Pfleiderer
Model: ZSK58
40956001
Used-Werner Pfleiderer Twin Screw Extruder, Type ZSK58F. 58mm (2.2" diameter) screws, 30:1 L/D, side by side, co-rotating. 7 housing sections, 2 vent ports. Electrically heated, water cooled. Max screw speed 300 rpm via a gearbox by a 110.25 hp/73.5 kW-380 volt/50 cycle/3 ph motor. (1) 21 hole die head. (1) Double water bath, stainless steel. (1) Rieter-Automatic details
|
|
|
|
|
40735001
Used- Farrel twin screw extruder, 37 mm, model FTX80H. Co-rotating screw design. Approximately 40 to 1 L/D ratio. 9 barrel segments, 1 feed section, no hopper. Electrically heated, water cooled. Driven by a 60 hp, 500 volt, 1750/2100 rpm DC motor. Flender reducer. Approximately 41'' centerline height. Includes a 4 1/2'' wide slot die, a Mokon model DB4J00N9 details
|
40733010
Used- Berstorff 25mm twin screw extruder, model ZE25, co-rotating side by side screw design. Approximately 28 to 1 L/D ratio. 6 barrel sections (3) vented, electrically heated, air cooled, 1 feed section with (2) ProRate dosing feeders. Approximately 43 1/2" centerline height. Driven by an approximate 7 1/2 hp DC motor thru a gearbox. Includes a control details
|
|
|
|
|
REQUEST PRICE QUOTE
Diameter (in.): 133
HP: 1650
Manufacturer: Werner Pfleiderer
Model: ZSK-M151000
40656002
Used-Coperion Werner & Pfleiderer twin screw extruder, type ZSK-133-M151000. Capacity 4 tons per hour. 27:1 L/D. 133 mm diameter x 3571 mm long screws. Co-rotating. Max screw speed 400 rpm. Electrically heated, water cooled. Includes gearbox by an approximate 1100 kW/1650 hp motor. (1) Double screen changer, (1) die head, (1) Coperion Werner & Pfleiderer details
|
40656001
Used-Berstorff twin screw extruder, type ZE130A x 28D, capacity 2.5 tons per hour. 28:1 L/D. 133 mm diameter screws. Co-rotating. Max screw speed min 30 rpm, max 350 rpm. Electrically heated, water cooled. Includes gearbox by 1000 kW/1500 hp motor. (1) Gear pump, (1) double screen changer, (1) ring water pelletizer, type WRG on wheels. Includes control details
|
40497001
Used- Farrell Twin Screw Extruder, 37 mm, Model FTX80. Co-rotating screw design. Approximately 36 to 1 L/D ratio. 4 barrel segments, 1 vented, 1 feed section no hopper. Electrically heated, water cooled, no cooling system. Driven by a 25 hp, 500 volt, 1750/2300 rpm DC motor. Flender gearbox ratio 3.591 to 1. Approximately 43'' centerline height. Includes details
|
40472001
Used- Berstorff 25mm twin screw extruder, model ZE25. Co-rotating side by side screw design. Approximately 28 to 1 L/D ratio. 5 barrel sections, electrically heated, air cooled, 1 feed section. 46" centerline height. Driven by a 7 1/2 hp, 240 volt, 1750/2300 rpm DC motor thru a gearbox. Includes a control panel with Eurotherm 808 controllers, and a Reliance details
|
10288003
Used-Baker Perkins 100 mm twin screw compounding extruder. Segmented twin screws. 50 hp DC Siemens Allis main drive motor. Barrel is 40" long, clamshell type, jacketed. Barrel lining has been removed and is not available. A pallet of spare screws is included. Screws are cored and fitted with rotary unions for cooling. Equipped with a control panel. details
|
|
|
14130000
Used-Coperion Werner Pfleiderer lab size twin screw extruder, type ZSK25WLE. 25 mm diameter screws, 40:1 L/D, co-rotating. 10 heating zones, electrically heated, water cooled, 1 vent port. Max screw speed 1200 rpm via a gearbox by a 32 hp/21.3 kw-400 volt/50 cycle/3 ph XP motor. Includes die head. (1) Werner Pfleiderer twin screw side feeder, type ZS-B25, details
|
11453020
Used: Werner Pfleiderer twin screw extruder, type 25K40F-32.5E. 40 mm screws, co-rotating, 40:1 L/D, electrically heated, water cooled, 10 barrel sections with (1) feed, (1) vented with side feed port, (2) spacers and (6) non-vented sections. 50 hp DC motor with SCR controller, W&P control panel with 5 barrel zones, 500 rpm screw speed, with Brabender feeder and details
|
|
|
11453000
Used: Used Werner & Pfleiderer twin screw extruder, type 25K40F-32.5E, 40 mm screws, co-rotating, 40:1 L/D, electrically heated, water cooled, 10 barrel sections with (1) feed, (1) vented with side feed port, (2) spacers, and (6) non vented sections, 50 HP DC motor with SCR controller W&P control panel with 5 barrel zones, 500 RPM screw speed, with Brabender details
|
90475
Used: APV twin screw extruder, 50mm screw diameter, model MPF50. Approximately 25:1 L/D ratio. Co-rotating screw design. 4 zone top vented electrically heated, water cooled split design barrel. (1) feed section with a top mounted K-tron model S-200 feeder. Approx 43" centerline height. Driven by a 30kw (40hp),3/50/380 volt, 1470 rpm motor. Includes a details
|
|
|
|
|
|
|
|
|
523857
USED: Werner Pfleiderer twin screw extruder, type ZSK160. Co-rotating,6 barrel sections electrically heated, water cooled. Screw speed 250rpm via gearbox by 1100 kW, 1489 rpm with (1) 18.5 kW/380 volt/50 cycle/3 ph motor starter. (1) Werner Pfleiderer underwater cutter,type UG400 with 12 knives. (1) Maag pump, type Polyrex PR180/125,7-68 rpm, 160 kW/1500 rpm/420 details
|
523858
USED: Werner Pfleiderer twin screw extruder, type ZSK160. Co-rotating,6 barrel sections electrically heated, water cooled. Screw speed 250rpm via gearbox by 1100 kW, 1489 rpm with (1) 18.5 kW/380 volt/50 cycle/3 ph motor starter. (1) Werner Pfleiderer underwater cutter,type UG400 with 12 knives. (1) Maag pump, type Polyrex PR180/125,7-68 rpm, 160 kW/1500 rpm/420 details
|
89087
USED: Maris 40 mm twin screw extruder, model TM40WW, serial #010990. Approximately 30:1 L/D ratio. Co-rotating screw design. 9 barrel sections. (1) vented. Electrically heated, water cooled (no system). Die clamp, (1) water cooled feed section. Driven by a 50 hp, 500 volt, 1750-2100 rpm DC motor thru a reducer. Approximately 41-1/2" centerline height. details
|
523562
USED: Berstorff model ZE-40 twin screw extruder. 40 mm diameter screw,co-rotating, 40:1 L/D with 8 barrel sections, electrically heated,air cooled, with (2) side feeders, vented barrel, belt driven with40 hp DC motor, 10 zone control panel with Eurotherm controllers, withK-tron feeder, 10 hold strand die. New 1987. details
|
|
|
|
|
86715
USED: Baker Perkins twin screw extruder. 50 mm screw diameter, model MP2050. Approximate 25:1 L/D ratio. Co-rotating screw design. Clamshell design, 5 zone electrically heated, water cooled barrel sections. Water cooled feed section, (1) die section. Approximate 44" centerline height. Driven by a 50 hp, 3/60/230/460 volt, 1770 rpm hydraulic power pack details
|
86493
USED: APV Baker twin screw extruder, 50 mm screw diameter, model F23215. Approximate 14:1 L/D ratio. Barrel is clamshell design. Approximate 28" long screw length. Electrically heated, water cooled. Front mounted single hole die. Extruder is driven by a 25 hp DC motor. Panel includes a Quantum 3 DC drive. Unitized on a skid with casters including a console details
|
|
|
522065
USED: 25mm Berstorff twin screw extruder, model 2E25X38D. 38:1 L/D,electrically heated, air cooled, (8) total barrel sections with (4)vented, (1) feed, (3) non-vented sections, 15 hp DC motor with SCRcontroller, Berstorff control panel with (7) barrel zones and (1)adapter zone, with Eurotherm temperature controllers, on board Nashvacuum pump, with stainless details
|
84306
Used- Berstorff twin screw extruder, model ZE60. 23:1 L/D ratio, 60 mm screw diameter. 5 barrel sections, vented, electrically heated, water cooled. No cooling system. Driven by a 150 hp 500 volt, 1750/2000 rpm DC motor. Unit includes: transformer, control cabinet and a control console including 808 controller. Last used in pelletizing. details
|
REQUEST PRICE QUOTE
Diameter (in.): .7
HP: 3
Manufacturer: Leistritz Corporatio
Model: MICRO-18G/40D
521954
USED: Leistritz twin screw co-rotating multi-mode extruder, modelMicro-18G/40D. 18 mm screw diameter, 40:1 L/d ratio, electricallyheated, water cooled. 10 total barrel sections with 1 feed, 6 closed,2 vented and plugged, 1 vented. Approx 3 hp DC motor with controller.On base with 8 zone control panel. Also includes water bath and strand pelletizer. details
|
521809
USED: Berstoff twin screw extruder, type ZE60x33D. 60 mm screws,33:1 L/D, side by side, co-rotating, electrically heated, watercooled. Screw speed 30-300 rpm by a 90 kw/60 hp-460 volt/50 cycle/3 ph motor via a gearbox. (1) 3.6" (90mm) double screen changer,(1) ring die head. Complete with downstream equipment and controlpanel. details
|
|
|
81919
USED: Berstorff twin screw extrusion system consisting of (1) Berstorff 60mm twin screw extruder, model ZE60A35, approx 30:1 L/D ratio, side by side co-rotating screws, (7) barrel zones, electrically heated, water cooled. Driven by a 110 kw (147 hp) DC motor, screw speed approx 400 rpm. (1) extruder control panel. (1) 19 hole strand die. (1) 2.2 kw Berstorff |